Home
Industrial Docs
Dashboard Quick Start Guide
Using the Dashboard
Industrial Installation Guide
Industrial Troubleshooting Guide
Utilities Docs
Dashboard Quick Start Guide
Using the Dashboard
Utilities Installation Guide
Utilities Troubleshooting Guide
Contact
Home
Industrial Docs
Dashboard Quick Start Guide
Using the Dashboard
Industrial Installation Guide
Industrial Troubleshooting Guide
Utilities Docs
Dashboard Quick Start Guide
Using the Dashboard
Utilities Installation Guide
Utilities Troubleshooting Guide
Contact
Utilities Installation Guide
Home
5
Topics
5
3. Install the Atoms
Guide Content
Expand All
Chapters
Before You Begin
1 Topic
Expand
Before You Begin
Chapter Content
0% Complete
0/1 Steps
What You’ll Need
Understanding Your Devices
1 Topic
Expand
Understanding Your Devices
Chapter Content
0% Complete
0/1 Steps
AT-U (Stand-Alone Units)
Installation Steps
4 Topics
Expand
Installation Steps
Chapter Content
0% Complete
0/4 Steps
1. Survey the Installation Area
2. Prepare the Atoms
3. Install the Atoms
4. Notify the Marmon team when installation is complete
Configuration and Verification
5 Topics
Expand
Configuration and Verification
Chapter Content
0% Complete
0/5 Steps
1. Access Device Settings
2. Activate and Configure Sensors
3. Calibrate all sensors
4. Set Timer Configuration
5. Save Settings
Set Up Alerts
2 Topics
Expand
Set Up Alerts
Chapter Content
0% Complete
0/2 Steps
1. Access Unit Settings
2. Add Alert Recipients
Verify Installation
1 Topic
Expand
Verify Installation
Chapter Content
0% Complete
0/1 Steps
Verify Installation
Best Practices
2 Topics
Expand
Best Practices
Chapter Content
0% Complete
0/2 Steps
Documentation
Regular Checks
3. Install the Atoms
Utilities Installation Guide
Installation Steps
3. Install the Atoms
Atoms are installed on the messenger wire using either a bucket truck or a hot stick.
The screw on the bracket should be tightened until the device no longer slips on the line.
Previous Topic
Back to Chapter
Next Topic
