Industrial Installation Guide

Guide Content

Chapter Content

0% Complete 0/1 Steps

Before You Begin

Chapter Content

0% Complete 0/3 Steps

AT-U (Stand-Alone Units)

Chapter Content

0% Complete 0/5 Steps

1. Survey the Installation Area

2. Prepare the Dashboard

3. Install the Gateways

4. Install the AT-R Devices

5. Connect to Gateway

Chapter Content

0% Complete 0/4 Steps

1. Access Device Settings

2. Activate and Configure Sensors

3. Set Timer Configuration

4. Save Settings

Chapter Content

0% Complete 0/2 Steps

1. Access Unit Settings

2. Add Alert Recipients

Chapter Content

0% Complete 0/2 Steps

1. Test Device Communication

2. Verify Data in Dashboard

Chapter Content

0% Complete 0/3 Steps

1. Documentation

2. Regular Checks

4. Install the AT-R Devices

Using zip ties, magnets, screws or adheisve, mount the AT-Rs on the desired piece of equipment

For vibration monitoring: place directly on the vibration source
For temperature monitoring: ensure good contact with the monitored surface

Back to Chapter